Ariston Next Evo X 16L Natural Gas Instantaneous Water Heater - 3632533
(Flue Included)
The Ariston Next Evo X 16 Natural Gas Water Heater is a compact, high-performance instantaneous gas water heater designed to provide hot water on demand without the need for a storage cylinder.
With a powerful 30kW maximum nominal heat input and a nominal hot-water flow rate of up to 16 litres per minute at a 25°C temperature rise, the Next Evo X 16 is well suited to domestic, leisure and light-commercial applications where a dependable supply of instantaneous hot water is required.
The appliance combines a slim wall-mounted design with electronic temperature management, a clear LED display, low-NOx combustion technology and an oxygen-free copper heat exchanger.
Key Features
- Ariston Next Evo X 16L instantaneous gas water heater
- Manufacturer part number: 3632533
- EAN / GTIN: 6927828021533
- Fuel type: Natural Gas
- Maximum nominal heat input: 30kW
- Minimum nominal heat input: 9.5kW
- Nominal hot-water flow rate: 16L/min at ΔT 25°C
- ErP energy rating: A
- Load profile: XL
- Electronic ignition - no permanent pilot flame
- Low-NOx lean-rich burner technology
- Oxygen-free copper heat exchanger
- Built-in water-temperature stabilisation
- Energy-saving ECO function
- Digital LED temperature display
- Post-ventilation system
- Overheat protection
- Low minimum operating water flow of 2.5L/min
- Operates from a minimum working water pressure of 0.2 bar
- Compact wall-mounted design
- 2-year manufacturer's warranty subject to Ariston terms
Product Specification
- Brand: Ariston
- Range: Next Evo X
- Model: Next Evo X 16 NG
- Product Type: Gas Instantaneous Water Heater
- Manufacturer Part Number: 3632533
- EAN / GTIN: 6927828021533
- Fuel Type: Natural Gas
- Maximum Nominal Heat Input: 30kW
- Minimum Nominal Heat Input: 9.5kW
- Nominal DHW Flow Rate: 16L/min at ΔT 25°C
- Minimum Operating Flow Rate: 2.5L/min
- Minimum Working Water Pressure: 0.2 bar
- Water Temperature Range: 35°C - 65°C
- Power Supply: 230V / 50Hz
- Noise Level: 63dB
- IP Rating: IPX4
- ErP Rating: A
- Load Profile: XL
- Net Weight: Approx. 15kg
- Height: 570mm
- Width: 345mm
- Depth: Approx. 187mm
- Colour: White
- Installation: Wall Mounted
- Warranty: 2 Years - subject to manufacturer terms
16 Litres Per Minute Instantaneous Hot Water
The Next Evo X 16 can provide a nominal flow rate of up to 16 litres per minute at a 25°C temperature rise.
Because the appliance heats water as it passes through the heat exchanger, there is no requirement for a conventional stored-hot-water cylinder.
This makes the unit particularly useful where space is limited or where hot water is required on demand.
30kW Natural Gas Burner
The Next Evo X 16 NG has a maximum nominal heat input of 30kW and a minimum nominal heat input of approximately 9.5kW.
The burner modulates its output according to water demand, helping maintain the selected outlet-water temperature while reducing unnecessary gas consumption.
Low-NOx Combustion
The Next Evo X uses Ariston's lean-rich burner technology to provide efficient combustion while helping reduce NOx emissions.
This modern combustion system provides a significant improvement over older instantaneous water heaters that rely on a continuously burning pilot flame.
Electronic Ignition
The appliance uses electronic ignition with flame-ionisation monitoring rather than a permanent pilot flame.
The burner therefore only operates when hot water is required, helping reduce unnecessary gas consumption during standby periods.
Oxygen-Free Copper Heat Exchanger
The Next Evo X features an oxygen-free copper heat exchanger designed to provide efficient heat transfer from the burner to the domestic hot-water supply.
Copper's excellent thermal conductivity allows the appliance to respond rapidly when hot water is requested.
Electronic Temperature Control
The front-mounted digital control panel allows the user to adjust the required hot-water temperature.
A built-in temperature-stabilisation system continually manages burner operation to help maintain a consistent outlet-water temperature as demand changes.
ECO Function
An integrated ECO operating mode allows the appliance to operate more economically where maximum water temperature is not required.
This can be particularly useful during warmer periods when incoming mains-water temperatures are higher.
Low Water Pressure Operation
The Next Evo X 16 is designed to operate with a minimum working water pressure of approximately 0.2 bar and a minimum operating flow rate of just 2.5 litres per minute.
This makes the appliance suitable for a wide range of installations where water pressure or flow can vary.
Hot Water Temperature Range
The electronic controls allow an outlet-water temperature range of approximately:
- Minimum: 35°C
- Maximum: 65°C
Compact Wall-Mounted Design
With approximate dimensions of 570mm high x 345mm wide x 187mm deep, the Next Evo X 16 offers a compact wall-mounted solution for instantaneous gas water heating.
Its slim profile makes it particularly suitable for installation in kitchens, utility rooms, leisure properties and light-commercial locations where available wall space is limited.
Typical Applications
- Kitchens
- Bathrooms
- Utility rooms
- Loft conversions
- Holiday homes
- Mobile / leisure applications where compliant
- Offices
- Workshops
- Light-commercial premises
- Properties requiring instantaneous hot water
Flue Requirements
The Next Evo X is a room-sealed gas appliance and requires a compatible flue system.
A standard 60/100mm concentric horizontal flue is available for the appliance, along with vertical flue and extension options.
Please note: unless specifically stated in the product option or bundle description, the flue should not be assumed to be included with the water heater.
Natural Gas Model
This listing is for the 16 litre Natural Gas version of the Ariston Next Evo X.
Ariston also manufactures an 11 litre LPG version. Gas-conversion kits are available for selected installations, but any gas conversion must be carried out in accordance with Ariston instructions by an appropriately qualified engineer.
Safety Features
- Electronic flame-ionisation monitoring
- Overheat protection
- Post-ventilation system
- Electronic gas valve
- Controlled burner modulation
- Room-sealed combustion system
Important Installation Information
This is a gas-fired instantaneous water heater and must be correctly sized and installed for the intended hot-water demand.
The installer should confirm:
- Available natural-gas supply and pipe sizing
- Mains-water pressure and flow rate
- Suitable flue route and termination position
- Electrical supply requirements
- Hot and cold-water connection requirements
- Suitability of the installation location
Gas Safe Installation Required
Installation, commissioning, servicing and any gas conversion work must be carried out by a suitably qualified Gas Safe registered engineer.
The appliance must be commissioned in accordance with Ariston's installation instructions and all applicable gas, water, electrical, ventilation and building regulations.
Couldn't load pickup availability
